CTS System - Basic IP SLA configuration

The following commands provides basic configuration to enable IP SLA in CTS system

• CTS System (172.16.181.57)

Couple of gotchas with Cisco TAC customers:
a) Starting 1.5 we include support and we need to configure in IP SLA responder port 32770 or above.
b) Configuring correct group schedule.

admin:utils ipsla responder enable
Starting IPSLA responder using port range 32770 - 33000...

utils ipsla responder initiators add net 172.16.154.0/24

• IP SLA Router (172.16.154.1)

ip sla monitor 1
 type jitter dest-ipaddr 172.16.181.57 dest-port 32800 num-packets 1500 interval 30
 request-data-size 256
 tos 136
 owner gonzalo
 tag TelePresence_small


ip sla monitor 2
 type jitter dest-ipaddr 172.16.181.57 dest-port 32801 num-packets 3000 interval 15
 request-data-size 960
 tos 136
 owner gonzalo
 tag TelePresence_medium


ip sla monitor 3
 type jitter dest-ipaddr 172.16.181.57 dest-port 32802 num-packets 5625 interval 8
 request-data-size 1400
 tos 136
 owner gonzalo
 tag TelePresence_large


ip sla monitor 4
 type jitter dest-ipaddr 172.16.181.57 dest-port 32803 num-packets 1000
 request-data-size 200
 tos 136
 owner gonzalo
 tag TelePresence_audio


ip sla monitor  10
 type jitter dest-ipaddr 172.16.181.57 dest-port 32804 num-packets 1000
 request-data-size 200
 tos 184
 owner gonzalo
 tag voice-only-calls

ip sla group schedule 1 10,1-4 schedule-period 1 frequency 60 start-time now age forever